Afterward knowing what AutoCAD is, and what a unmarried-line diagram is and how to apply it in AutoCAD, today we will terminate to help y'all solve 1 of the virtually common bug in the programme: change units in AutoCAD

If yous take ever used the software you volition agree with me that on more than than 1 occasion y'all have had to look up how to change units in AutoCAD when y'all had already started a project and going dorsum was not an option.

In this post we will see the different alternatives offered past the software when information technology comes to dealing with this very common circumstance. We volition get-go by looking at the types of units and angles and then how to specify the units of a drawing and finally how to modify them on the wing.

UNITS AND ANGLES

AutoCAD allows you to work with internationally recognised length measurements and the accuracy with which they volition exist displayed, i.e. their fractional size. The units are every bit follows:

  • Decimals
  • Feet and inches
  • Franchisees
  • Scientific

In the same mode. Y'all tin can also specify the different angle measurements and their accuracy:

  • Decimal degrees
  • Degrees – minutes – seconds
  • Centesimal degrees (with lower case g suffix)
  • Radians (with lowercase r suffix)
  • Topographic units
Change AutoCAD units - Units and angles

DRAWING SETUP -> UNITS

If you decide to alter the cartoon units, y'all must bespeak that the objects that already exist on your piece of work tabular array should be scaled or maintained in their original size. You can also specify whether the drawings yous insert from the moment you change the units will as well be scaled or if, on the reverse, they will go along their size.

This is one of the virtually mutual issues, because if the cartoon is in an advanced country, it can cause a filibuster if the scale of the objects is not washed correctly. Keep in mind that when yous change the units, the area and volume will also change.

To make the change of units we must follow the following route:

File -> Utilities -> Drawing Setup

Select the "Units" tab and under "Cartoon setup", the one yous are interested in.

To scale the drawings y'all insert from this point on, select the option "Scale objects inserted from other drawings"

CHANGE THE UNITS OF A Drawing

However, there are other alternatives for changing the units of a drawing on the fly. In detail:

  • Inserting the work into a new file with the desired measurements
  • With the DWGUNITS command

INSERT/CLASSICINSERT– CREATING A NEW FILE

1 of the ways to change the units rapidly is to insert the objects in a new cartoon in which we accept specified the units. Permit's see how:

  • create a new cartoon
  • Enter the command UNITS
  • Select the units yous need
  • Enter the lawmaking INSERT or CLASSICINSERT (AutoCAD 2022)
  • In "Examine" look for your previous drawing and fix, by cancelling the corresponding options, that the cartoon is inserted without calibration or rotation in 0.0
  • And then select the "Decompose" option

CHANGE UNITS WITH DWGUNITS

Another mode to change the units of your drawing is with the DWGUNITS command, which will display a sequence you must complete.

Let's encounter how:

  • Enter the DWGUNITS control

The command volition initiate a sequence of requests, which are:

  • Drawing units
  • Drawing unit of measurement display formats
  • Linear brandish format <ii>:2
  • Linear display accuracy
  • Scaling of inserted objects
  • Matching UNITESINS with the units of the drawing
  • Calibration current cartoon objects
Cambiar unidades autocad - DWGUNITS

As yous can see, despite being a recurring problem, the solutions are not complicated. Even so, it's a good idea to always have alternatives at mitt so equally non to waste a lot of time and cake your piece of work by looking for means to change units without affecting you more information technology should.

Nosotros hope y'all found this article useful. If you remain attentive, nosotros will be giving you some pocket-sized tips and tricks to use in AutoCAD, particularly those that solve the most mutual doubts that we all, once, have faced.